Angular selective
Angular Selectivity is a special case of angular dependence. Angle dependant performance simply means that the relevant property, for example, the transmittance through or reflectance from an illuminated surface takes on different numerical values for different angles of incidence.
The angle of incidence, which is often designated "theta” is the angle subtended between the normal or perpendicular plane to a given surface and a ray of incoming (incident) light. A common example is that any ordinary pane of clear glass will have its highest transmittance value (and lowest reflectance value) for theta = 0° and its lowest transmittance value (namely zero) and highest reflectance value for theta = 90°.
To define Angular Selectivity, we need to introduce a second angle, namely an azimuthal angle or "phi", which describes rotation around the surface normal in a plane parallel to the surface. It is only of interest if the surface is not homogeneous but has some structure which varies according to the azimuthal angle.
Taking a vertically mounted projection and defining the upward direction by phi = 0°, we have angle selective behaviour, because the transmittance for a given fixed theta value is different for different phi values. Using a lamella or louvre array as an example, when theta = 40 ° and phi = 0°, the transmittance is quite low, whereas for theta = 10° and phi = 180°, the transmittance is higher.
If different amounts of light are transmitted, for the same angle of incidence theta, depending on whether the light comes from above or below then the sample is angle selective. By contrast, a homogeneous material like a pane of clear glass is not angle selective; it always has the same transmittance value for a given theta, independent of the value of phi.
[edit] Related articles on Designing Buildings.
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.